articles

Accessories: Motorized Stand

#1  
Problem Motorized I/V pole doesn’t run.
Solution
  1. Stand Main switch must be On, green light On.
  2. Press up/down rocker switch to check, if I/V pole runs in any direction.
  3. If I/V pole do not run in any direction - Motor or Board is faulty.
  4. If motor runs but I/V pole doesn’t most probably belt is broken.
  5. If stand work while remote does not -- interconnecting cable is broken or – try another interconnecting cable.

Motorized Stand - PDF   (File will open in new window)

System Configuration PDF   (File will open in new window)

Back to top

©2018 Surgical Design Corporation. All Rights Reserved.  12/14/18
Website Design and Development by Timothy Wood Design, LLC