articles

Accessories: Remote Control

Ocusystem Art
#1  
Problem Remote Control does not function.
Solution
  1. Check to see that the remote switch (little round black button on the back of machine) is turned on. The green light on the upper far right hand corner of the machine panel will display when remote is activated.
  2. Check to see that the green light blinks when activating any button on the remote hand piece.
  3. Check to see that the red light on the remote transmitter blinks open activation.
  4. Check to see if the batteries are good in the remote hand piece.
 
Advantage
#1  
Problem Remote Control does not function.
Solution
  1. Check batteries.

Back to top

©2018 Surgical Design Corporation. All Rights Reserved.  12/14/18
Website Design and Development by Timothy Wood Design, LLC